FINGERTRACKING2 Tactile

【购买前请直接联系我们 020-39119933】

Our lightweight solution for hand-tracking

The Fingertracking device is an add-on to the ART tracking system, which allows you to track the orientation of the hand and the position of the fingers. It is wireless, works for one as well as for both hands and is available as a three finger version.With the new FINGERTRACKING2 Tactile device the user is additionally able to sense in his fingertips collisions with virtual objects!

Technical Data

Function
Synchronization	Via modulated flash from camera
Power Supply	2 x AAA NiMH battery (930 mAH each)
Weight (incl. battery)	115g (incl. 3-finger thimbles)
Performance
Frame rate (hand target)	depends on camera system, up to 300Hz
Vibro Motor
Size	2.15 x 8mm precision microdrive at each finger thimble
Special feature	automatic switch off if no signal from backend for more than 1 sec
Radio module*
Type ID	IEEE 802.15.4
Frequency	ISM frequency range available: 2400.00 – 2483.50 MHz, 8 channels
Transmission power	2.0 mW
Power Supply
Rechargeable batteries	2 x AAA NiMH battery (930 mAH each)
Continuous operation¹	approx. 13 hours (with 300 Hz / 30us flash, vibro motor 50% in use)
Battery charging duration	<3h
Battery Charger
Power Supply	AC: 110-250V, 50/60Hz, max. 10W or DC: 9-12V 1A
Weight (incl. power supply)	202g (without batteries and power cord)
_{*applicable for tactile version}

Technical Drawings

Handtarget

Fingerbowls

Available finger bowl sets:

Set, size (diameter):	Thumb ØA,	index finger ØB,	middle finger ØC
Set XS:	ØA 14mm	ØB 11mm	ØC 12mm
Set S:	ØA 16mm	ØB 13mm	ØC 14mm
Set M:	ØA 18mm	ØB 15mm	ØC 16mm
Set L:	ØA 20mm	ØB 17mm	ØC 18mm